Thank you for purchasing an ECD SmartDRY™ Cabinet. We know that in today’s competitive market place, customers have several choices when purchasing a dry storage cabinet. Our continued reputation as a leading supplier of process and measurements tools depends of each customer’s continued satisfaction. ECD, Inc. stands behind our products and wants to let you know we are here if you need us.
Before you use the ECD SmartDRY™ Cabinet, read this entire manual carefully to understand how to install, operate, and maintain the unit in a safe manner. Your satisfaction with the unit will be maximized as you read about its safety and operational features.
Keep this manual on-hand so it can be used by all operators of the unit. Be sure all operators of the unit are given appropriate training before you put the unit in service.
This Setup and Operation Manual explains how to install use ECD SmartDRY™ Cabinet and Network Dashboard.
This Setup and Operation Manual is written for users of varied experience. If a section covers information you already know, feel free to skip to the next section.
|
Hardware portions of this manual are written to reflect the following firmware version 00.00.16 and higher. The Network Dashboard portions reflect version(s) 1.06 and higher. |
.png "Important Information")
This Quick Start Guide is designed to help the user to familiarize themselves with the equipment and perform basic setup. For detailed information, please refer to the Setup and Operation Manual.
The ECD SmartDRY™ Cabinet is ready to plug in and begin using as soon as it is safely set up. The Cabinet is preset to meet the requirement of J-STD 033 for the safe storage of Moisture Sensitive Components. No additional programming is required. Once unpacked, here are some steps to quickly get your Cabinet up and running.
Although pre-programmed to meet the requirement of J-STD 033, the Cabinet must run for a minimum of 8 hours to acclimate and regenerate its dryer module. Please allow this time before adding your moisture sensitive components. Also, the alarm limits have been pre-programmed however, are not enabled. Once the Cabinet has stabilized at set point, the alarms can be enabled if desired. You may also want to explore the other Alarms: SmartDRY™ Temperature, SmartBAKE™ RH, and SmartBAKE™ Temperature, enabling them as you wish. Refer to section 9.1.2 Alarms (SmartDRY™) in the Setup and Operation Manual for detailed information.
|
When accessing options that require a Passcode the system default Passcode is 314. As you enter protected options, you will be prompted to enter it using the Up or Down buttons. Once selected, all locked options remain “unlocked” until you return to the Main Display.
|
.png)
.png)