_250x150.png){kind=logo}
ECD |
|
ECD NORTH AMERICA (US, CANADA, MEXICO, CENTRAL AND SOUTH AMERICA) Worldwide Headquarters |
|
4287-B S.E. International Way |
|
Milwaukie, Oregon 97222-8825 U.S.A. |
|
Telephone: |
+1 800.323.4548 |
|
+1 503.659.6100 |
FAX: |
+1 503.659.4422 |
Email: |
|
|
|
Internet: |
|
|
|
EMEA (EUROPE, MIDDLE EAST, AFRICA) |
|
UK Office |
|
Mobile:: |
+44 (0) 7903 252560 |
Email: |
|
|
|
APAC (ASIA-PACIFIC, CHINA, INDIA) |
|
Singapore Office |
|
Telephone: |
+65 9692.6822 |
Email: |
|
|
|
©2022 ECD. All Rights Reserved. Printed in USA. US Products of ECD are covered by foreign and US Patents and Patents Pending. Information in this publication supersedes all previously published information. This Publication may not be translated and/or reproduced or stored in data retrieval system, or transmitted in any form or by any means without the express written permission of ECD. Specification and price change privileges reserved.
The trapezoidal ECD logo® is a registered trademark of ECD. SmartDRY™ is a trademarked by ECD.
While every precaution has been taken in the preparation of this document, ECD assumes no responsibility for errors or omissions, or for damages resulting from the use of information contained in this document or from the use of programs and source code that may accompany it. In no event shall ECD be liable for any loss of profit or any other commercial damage caused or alleged to have been caused directly or indirectly by this document.
Declaration of Conformity
|
Electronic Controls Design, Inc. |
|
4287-B S.E. International Way |
||
Milwaukie, Oregon U.S.A. 97222-8825 |
||
(503) 659-6100 / (800) 323-4548 |
||
FAX: (503) 659-4422 |
Declaration of Conformity
Product: |
ECD SmartDRY™ SD-10 & SD-10SB |
Part Number: |
E55-7310-30/35 E58-7310-60/65 |
|
ECD SmartDRY™ SD-30 & SD-30XD |
|
E55-7330-30/35 E57-7339-30/35 |
|
ECD SmartDRY™ SD-48F & SD-48FXD |
|
E55-7483-30/35 E57-7489-30/35 | N/A | N/A |
The undersigned hereby declares, on behalf of the ECD Inc., that the above-referenced product, to which this declaration relates, is in conformity with the provisions of:
SAFTEY: IEC 61010-1 “Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements”
EMISSIONS: EN 61000-3-2:2014 “Electromagnetic Compatibility (EMC) - Limits For Harmonic Current Emissions …” EN 61000-3-3:2013 “Electromagnetic Compatibility (EMC) - Limitation of voltage changes, voltage fluctuations and flicker …” EN 61000-6-4:2007+A1:2011 Class A “Electromagnetic compatibility (EMC) - Emission standard for industrial environments” FCC 15.107:2015 Class A “Conducted Limits” FCC 15.109(g):2015 Class A “Radiated emission limits” ICES-003:2012 Class A “Information Technology Equipment (ITE) – Limits”
IMMUNITY: EN 61000-6-1:2007 “Electromagnetic Compatibility (EMC). Immunity for residential, commercial and light-industrial environments” |
The Technical Construction File required by this Directive is maintained at the corporate headquarters of ECD, Inc. |
||
Name: |
Paul Austen |
|
Position: |
Senior Project Engineer |
|
Signature: |
|
|
Date: |
August, 2015 |
|
