IMPORTANT: READ THIS MANUAL IMMEDIATELY.
Your satisfaction and safety require a complete understanding of the ECD SmartDRY™ Cabinet, including its proper function and operation. Be sure operators are given adequate training before attempting to put the cabinet in service.
|
This equipment must be used only for its intended application; any alterations or modifications will void your warranty. |
.png "Warning")
2.1 Inspection
The carrier, when accepting shipment, also accepts responsibility for safe delivery and is liable for loss or damage claims. On delivery, inspect for visible exterior damage. Note and describe on the freight bill any damage found and enter your claim on the form supplied by the carrier.
2.2 Loss or Damage
Inspect for concealed loss or damage on the cabinet itself, both interior and exterior. If any, the carrier will arrange for official inspection to substantiate your claim.
2.3 Shipping Materials
Save the shipping crate until you are sure the unit has been delivered in good condition.
2.4 Return Shipment
If for any reason you must return the unit, contact ECD for a Return Materials Authorization (RMA). Be prepared to supply the Model Number and Serial number located on the Serial number label when requesting an RMA. Please refer to 11.0 Service and Troubleshooting for information for contact information or visit www.ecd.com.
2.5 Accessories
Verify all of the equipment indicated on the packing list is included with the unit. Carefully check all packaging before discarding.