Equipment

<< Click to Display Table of Contents >>

Navigation:  Instruments > SuperM.O.L.E.® Gold 2 >

Equipment

The SuperM.O.L.E.® Gold 2 continues the legacy of the original SuperM.O.L.E.® Gold. With all the power of a MEGAM.O.L.E.® 20. It retains the same form factor, thermocouple connector type, and channel count (6) in addition to individual channel LEDs.

RED indicates channel is “active”, as configured in the software.

GREEN indicates that thermocouple is plugged in and a complete circuit.

 

SuperM.O.L.E. Gold

Features/functions:

Thermocouple/Inputs:This is where Type “K” Thermocouples are connected.

Data/Charging Port: This port is located on the backside of the Profiler. This is used to transfer data through the USB computer Interface cable to the computer and charge the internal Power Pack.

RF Antenna Connector: This is where the Optional RF antenna is connected.

Buttons: ON/OFF, Record & OK.

Button:

Action:

ON/OFF

Turns Profiler "ON/OFF".

Record

Starts/Stops Profiler recording data.

OK

Invokes "OK" process where the last recorded profile is compared to pre-configured criteria resulting in a "Pass" or "Fail" mode.

 

Activity Indicators: These are LED's that indicate what state the SuperM.O.L.E.® Gold 2 Profiler is in. Refer to the illustration and table below.

LED:

Action:

LED Color

smg2_top

ON/OFF

Indicates Profiler is "ON" and idle

Green (Solid)

Record

Indicates Profiler is recording data

Green (Flashing)

OK

Indicates recorded profile passes pre-configured criteria using the Target 10-OK tab in the software.

Green - Pass (Solid)

Red - Fail (Solid)

Temp(erature)

Indicates if the internal temperature is at or above a certain threshold.

Red (Solid) >40°C

Battery

Indicates when the internal Power Pack voltage is low

Red (Solid) <3.0V

RF (Radio Frequency)

Indicates when unit and RF receiver is transferring data

Blue (Flashing)

Channel Indicators

Indicates if the channel is configured and/or the attached thermocouple is a complete circuit

Green - Complete  Circuit (Solid)

Red - Configured (Solid)

Rider

Indicates when Profiler is connected to a RIDER® NL 2 test pallet

Green (Solid)

Charge

Indicates when the internal Power Pack is charging

Yellow (Solid)